Enclosures

If you are ready to create a new project, begin the process by browsing our enclosures and selecting the appropriate one for your project.

Browse >

Single-Access Enclosures

Single-access enclosures are manufactured from 304 (or optional 316) stainless steel in 12-gauge or 14-gauge according to the UL 50 standard. Exterior seams are continuously welded, ground smooth, and polished to the industry standard #4 brushed finish. Interior seams are spot-welded for added strength and rigidity. Stainless steel piano hinges run the entire length of the doors. Single-cell molded gasket is continuous and compression fit to the enclosure for easy replacement in the field. A pad-lockable three-point roller latch is standard. All enclosures are built to order, and they will include installation of all specified accessories as well as pre-cut holes for any HMI, buttons, conduits, etc. that you require.

  • Single-Door/Single-Access
    Single-Door/Single-Access

    These enclosures feature stainless steel piano hinges the full length of door and a pad-lockable three-point roller latch.

    • Sizes are available up to
      72”H x 36”W
    • 12 ga or 14 ga, 304 Stainless, #4 brushed finish
    • UL/NEMA Listed Type 1, 3R, 4, or 4X; File Number E229571
  • Double-Door/Single-Access
    Double-Door/Single-Access

    Overlapping double door construction eliminates the need for a center post.

    • Sizes are available up to
      72”H x 72”W
    • 12 ga or 14 ga, 304 Stainless, #4 brushed finish
    • UL/NEMA Listed Type 1 or 3R; File Number E229571

Dual-Access Enclosures

Dual-access enclosures offer front and rear entry doors. Standard panel mounts are centered but may be specified as offset to the front or back. Enclosures are manufactured from 304 (or optional 316) stainless steel in 12-gauge or 14-gauge according to the UL 50 standard. Exterior seams are continuously welded, ground smooth, and polished to the industry standard #4 brushed finish. Interior seams are spot welded for added strength and rigidity. Stainless steel piano hinges run the entire length of the doors. Single-cell molded gasket is continuous and compression fit to the enclosure for easy replacement in the field. A pad-lockable three-point roller latch is standard. All enclosures are built to order, and they will include installation of all specified accessories as well as pre-cut holes for any HMI, buttons, conduits, etc. that you require.

  • Single-Door/Dual-Access
    Single-Door/Dual-Access

    These enclosures feature stainless steel piano hinges the full length of door and a pad-lockable three-point roller latch.

    • Sizes are available up to
      72”H x 36”W
    • 12 ga or 14 ga, 304 Stainless, #4 brushed finish
    • UL/NEMA Listed Type 1, 3R, 4, or 4X; File Number E229571
  • Double-Door/Dual-Access
    Double-Door/Dual-Access

    Overlapping double door construction eliminates the need for a center post.

    • Sizes are available up to
      72”H x 72”W
    • 12 ga or 14 ga, 304 Stainless, #4 brushed finish
    • UL/NEMA Listed Type 1 or 3R; File Number E229571

Junction Boxes

Junction box enclosures are manufactured from 304 (or optional 316) stainless steel in 16-gauge or 14-gauge according to the UL 50 standard. Exterior seams are continuously welded, ground smooth, and polished to the industry standard #4 brushed finish. Stainless steel piano hinges run the entire length of the door. Pour-in-place gasket is adhered to the door. Stainless steel JIC style latches are spot-welded to the enclosure and mounting flanges are provided top and bottom.

  • Junction Boxes
    Junction Boxes

    These enclosures feature stainless steel piano hinges the full length of door and a pad-lockable three-point roller latch.

    • Sizes are available up to
      24”H x 24”W x 12”D
    • 12 ga or 14 ga, 304 Stainless, #4 brushed finish
    • UL/NEMA Listed Type 1, 3R, 4, or 4X; File Number E229571